下沟煤矿本煤层预抽钻孔合理封孔长度研究

封孔长度的合理性对于煤层预抽钻孔的抽采质量影响较大，当封孔长度较大时，不利于封孔段瓦斯的抽采，同时封孔成本增加，反之当封孔段长度较小时，若未封孔部分与煤壁裂隙导通，钻孔发生漏气又影响钻孔抽采质量。为确定合理的封孔长度，针对下沟煤矿302工作面特定的地质条件，采用单孔声波发射对巷道卸压区和应力集中区范围进行了研究，通过分析卸压区范围，确定了合理的封孔长度，并结合试验孔周边的预抽钻孔抽采数据，进行了验证分析，得出该工作面的合理封孔深度为8 m。     

混凝土框架结构负弯矩区围板型粘钢加固节点抗震空间效应研究

本文以某办公楼改造工程为实例,对框架结构负弯矩区围板型粘钢加固方法的空间效应进行研究。通过ANSYS有限元软件,采用模态分析、谱分析、时程分析对3组模型进行仿真计算,对3组模型的抗震空间效应结果进行对比分析,结果均显示围板型粘钢加固方法具有较好的抗震性能。本文结果对多层或高层结构某区域梁负弯矩加固后的局部效应具有指导意义。     

胡尖山地区长4+5层油气富集控制因素研究

胡尖山地区长4+5油层组储层非均质性强、物性差异较大,开展该区储层地质特征研究,尤其是针对胡尖山地区长4+5油层组的构造形态、储层特征、孔隙类型、油藏类型的研究,分析原油的分布特征,总结原油富集区的聚集特征、重点分析分布特征及控制因素,得到胡尖山地区长4+5层油气富集的规律,可加深对优质储层形成机理和分布规律的认识,为油藏勘探开发提供有利的方向。     

钢筋混凝土拆除爆破炮孔装药量的确定

本文从分析钢筋混凝土爆破破坏形态出发,对钢筋混凝土的配筋情况,如强度、配筋网规格、钢筋层数等对拆除爆破的影响作了量化处理,在前人的基础上大胆提出了钢筋混凝土加强抛掷爆破的炮孔装药量计算公式,并在实际工程中得到了验证。     

负压吸引技术应用于大面积烧伤患者围术期的效果探究

目的:探究环磷酸腺苷联合负压吸引技术应用于大面积烧伤患者围术期的效果及肾保护作用探究。方法:选择2018年12月到2020年12月于医院治疗的120例大面积烧伤患者为研究对象,以随机数字表法对患者分组,60例患者为研究组,60例患者为对照组,对照组给予负压吸引技术治疗,研究组在此基础上给予环磷酸腺苷治疗,治疗前、后测定两组患者干扰素-γ(IFN-γ)、白细胞介素-2(IL-2)、白细胞介素-10(IL-0)、白细胞介素-6(IL-6)、可溶性血管细胞粘附分子-1(sVCAM-1)、一氧化氮(NO)、内皮素(ET-1)、血管内皮生长因子(VEGF)、胱抑素C(Cys-C)、肌酐(Scr)、血尿素氮(BUN)、肾损伤分子-1(KIM-1)水平,记录两组患者手术时间、麻醉苏醒时间、住院时间。结果:研究组IFN-γ、IL-6水平低于对照组(P<0.05),研究组患者IL-2、IL-10水平高于对照组(P<0.05),研究组NO、VEGF水平高于对照组(P<0.05),研究组患者sVCAM-1、ET-1水平低于对照组(P<0.05),研究组患者Cys-C、Scr、BUN、KIM-1水平低于对照组(P<0.05),研究组手术时间低于对照组(P>0.05),研究组麻醉苏醒时间、住院时间低于对照组(P<0.05)。结论:环磷酸腺苷联合负压吸引技术应用于大面积烧伤围术期患者,可降低患者IFN-γ、IL-6水平,提升患者IL-2、IL-10水平,抑制患者炎症,改善患者血管内皮功能,降低患者Cys-C、Scr、BUN、KIM-1水平,减少患者肾功能损伤,减少患者麻醉苏醒时间及住院时间。     

Study on downward flame spread over extruded polystyrene foam in a vertical channel: Influence of opening area

Experimental methods and theoretical analysis are employed to investigate effects of channel opening area on downward flame spread characteristics of extruded polystyrene (XPS) thermal insulation materials on building facade. The average flame height first drops and then rises as dimensionless opening area (the ratio of sidewall opening area to sidewall area, ie, S^*) increases. As S^* rises, both the average and maximum temperature of the curtain wall decrease, and the decreasing of the average temperature is linear. XPS surface temperature history can be divided into four stages, ie, inapparent rising stage (preheating), significant rising stage (melting), dropping stage (pyrolysis), and rerising stage (ignition). The preheating length first rises and then drops as S^* increases. The XPS flame spreads steadily at the early period while acceleration occurs at the later period. For different opening areas, the difference in spread distance history is not apparent in the early stage while this difference is significant in the later stage. The flame spread rate (V_f) first increases and then decreases as S^* rises. A downward flame spread model for XPS in vertical channel with openings is built. The varied trend of V_f predicted using this model corresponds to the experimental result.     

基于动态策略的移动警务终端安全管控系统的设计与实现

对移动警务安全接入平台中的终端设备的安全防护问题进行了研究,提出并研制了一种基于动态策略的移动警务终端安全管控系统,整个系统由客户端、前置服务端和内网服务端组成,前置服务端和内网服务端分别部署在前置区和公安内网,客户端部署在移动终端设备上,确保在移动接入区和公安内网区有效进行物理隔离的前提下,将系统制定的各种安全策略规则下发到客户端执行,规范用户对移动终端的本地软硬件资源和网络资源的使用,实现安全威胁检测、防护及预警,对移动终端用户的违规访问、操作行为进行全面监测和上报,实现终端设备安全和行为的统一管理.     

Novel preparation and high electrical performance effect of Mn-doped ultra-high surface area activated carbon (USAC) as an additive for Ni hybrid capacitors

This paper reports the synthesis of various molar concentrations of manganese (Mn)-doped Ultra-High Surface area Activated Carbon (USAC) additives and their efficient use as cathode materials for supercapacitors. We synthesized the nanoparticles via a novel and facile dip-coating process and characterized them in detail by various analytical techniques. The SEM, EDAX, and XPS results showed that the Mn ions were successfully substituted on the USAC additives’ layered structure without any structural changes. The long cyclic stability of the as-prepared Mn-doped USAC additives was tested as a cathode material for supercapacitors at different current densities. The detailed experimental results showed that the Mn dopant content crucially determines the electrochemical performances of the USAC additives. Electrochemical measurements showed that the MnCEP-S600HTT with 0.10 mol% molar concentration of Mn dopant gives the best cycling performances. It delivers a discharge capacity of 262.9 mAh g^?1 after 100 cycles. Further increasing the current density to 1000 mA g^?1 allowed it to still maintain 253.6 mAh g^?1 after 200 cycles. We confirmed that the structure of Mn-doped USAC additives is an important pole to improve the structural stability and electrochemical properties.